RattanTree Patio Furniture Buying Guide: Plan Seating, Shade and Storage

Use a few practical checks to plan a patio around how you sit, eat and protect furniture, with RattanTree options for each job.

A patio set can look right in a product photo and still be awkward at home if chairs block the door or there is nowhere to put a drink. Start with the way you expect to use the space, then work out how much room furniture can take without pinching the routes through it.

We reviewed the product information on RattanTree’s UK store to map a few concrete choices to common patio needs. The listings describe rattan furniture, dining sets, a retractable pergola and protective covers; dimensions and included pieces are details to confirm on each product page before ordering.

Some links in this article are affiliate links: if you make a purchase through them, we may receive a small commission.

Highlights

• Measure the usable patio area and leave clear routes before choosing a set.
• The 4 Pieces Patio Furniture Sets pairs a sofa, chairs and glass table for conversation seating.
• The 9 Pieces Rattan Garden Furniture Set is the dining-led option, with a table and four chairs.
• The 2mx3m Metal Pergola has a retractable roof canopy; compare the listed footprint with your space.
• A Patio Furniture Cover can protect a set when it is not in use; check dimensions against the furniture.

Step 1: map the space before choosing pieces

Measure the part of the patio that can actually hold furniture, rather than the full paved area. Include the door swing, steps, planters, barbecue and any route people need to cross. Mark the outline with tape or spare boxes and try walking around it. This quick mock-up can reveal a tight corner before a large set arrives.

Then decide how many people normally sit outside at once. A pair of chairs and a table may suit a small morning coffee spot, while a family or frequent host may value a sofa arrangement or a dedicated dining table. Think about where cushions and loose accessories will go when the weather changes, too.

• Keep a comfortable route from the house to the garden.
• Leave room to pull chairs back from a table.
• Check access for carrying and assembling flat-pack pieces.
• Write down the maximum furniture footprint before browsing.

Step 2: pick the layout for how you spend time outside

For relaxed conversation, look at the 4 Pieces Patio Furniture Sets, listed as a sofa, chairs and a glass table with washable cushions. This arrangement gives guests seats facing one another and a central surface for drinks. Confirm the exact included pieces on the listing because product titles and variants can describe a configuration differently.

If meals are the main event, compare that with the 9 Pieces Rattan Garden Furniture Set, whose title specifies a rattan dining table and four chairs. A dining layout gives plates and serving dishes a more useful home than a low coffee table, but it asks for a larger clear area once chairs are pulled out. Measure the table footprint and allow extra space around it. Revisit the RattanTree dining-set page for the listed configuration and measurements.

RattanTree also lists modular corner seating, including a five-seat option. Modular pieces can be rearranged to suit a corner or open arrangement, based on the store’s description. That flexibility is useful when the patio layout changes, though modules still need sufficient room and should not obstruct access. Compare the module count, cushion details and dimensions with your sketch rather than relying on a broad product name.

Step 3: decide whether shade belongs in the plan

Shade is a separate decision from seating. Notice where direct sun falls at the time you use the patio, and whether a wall, existing umbrella or tree already gives enough cover. If not, the 2mx3m Metal Pergola is a RattanTree option with a retractable roof canopy. A retractable design lets you consider both open-sky and shaded use, according to the product listing.

Before choosing a pergola, compare its stated footprint with the actual space and check how it is intended to be fixed or assembled. The product page is the place to confirm canopy operation, materials, installation requirements and any guidance for exposed conditions. Shade structures can be more involved than adding chairs, so check the instructions and suitability for your surface before settling on a layout. The UK pergola listing is where to confirm those product-specific details.

Step 4: plan for protection and upkeep

Outdoor furniture needs a storage or protection routine. Consider where cushions can dry and be stored, whether the set will remain outside between uses, and how much cleaning you are comfortable doing. RattanTree’s listings describe PE rattan and metal frames on patio sets; some products mention removable or washable cushion covers. Check the particular item’s care details rather than assuming every cushion or finish is the same.

A Patio Furniture Cover is listed as a waterproof cover for a patio table and chairs. Match its measurements to the furniture including chair backs, table edges and any fire feature. A cover that fits too tightly can be awkward to put on, while one that is too loose may not protect as intended. Follow the store’s care guidance and allow furniture to dry as directed. Compare the cover listing with the set you intend to protect.

Compare the main patio-planning options

Use the table as a shortlist, then check the live product page for available configurations and current product information. Costs can vary with the set size, materials and extras included, so compare like with like and check the store listing for the current price before making a decision. Refer to the seating set details and dining set details directly when comparing configurations.

A simple order for making the choice

It is easier to choose furniture in a sequence than to browse every product type at once. These steps keep the decision tied to the space and the job each item needs to do:

1. Sketch the usable area and note doors, paths and fixed features.
2. Choose the primary activity: dining, conversation or lounging.
3. Select the smallest layout that comfortably serves that activity.
4. Add shade only if the sun pattern or lack of cover makes it useful.
5. Check dimensions, included components, care guidance and assembly notes on the UK listing.
6. Plan where cushions and protective covers will be kept between uses.

When comparing listings, focus on specifics that change day-to-day use: seat count, table height, cushion cover care, frame and weave materials, and whether modules can be moved. A feature is valuable only if it suits your routine. For example, washable covers matter more when children or frequent outdoor meals are part of the plan; modular seating matters more if the arrangement needs to change. For a more detailed look at seating dimensions, compare the conversation set listing with your measurements. Dining shoppers can also review the table and chair configuration alongside their sketch. If shade is a priority, check the pergola details before planning around it, and compare cover fit in the cover dimensions.

Where the range fits well

• Several layouts cover conversation seating, dining and modular lounging.
• Practical details on some listings include glass table surfaces and removable cushion covers.
• Separate shade and cover options let you build the setup around existing garden features.
• UK store product pages provide dimensions and configuration details to check before ordering.

Details to check before committing

• Product titles can be broad; verify the exact set contents and selected configuration.
• Measure all sides and clearance, not just the furniture’s listed footprint.
• Assembly, anchoring and care requirements differ by product, so review each listing.
• Outdoor materials still need appropriate care and weather protection for their instructions.

Which RattanTree patio setup should you shortlist?

For a patio used mainly for relaxed seating, start with the 4 Pieces Patio Furniture Sets and check that its footprint leaves clear routes. If meals are the priority, the 9 Pieces Rattan Garden Furniture Set is the more direct match, provided the patio can handle the table and pulled-back chairs. Add the 2mx3m Metal Pergola only after confirming placement and installation requirements.

RattanTree’s range gives shoppers several ways to combine seating, dining and shade, but the product pages need careful checking: dimensions, included parts and care notes determine whether a set suits a particular garden. We would make the floor plan first, shortlist one layout, then confirm those details and the current listing before deciding.